fax problem on ir3300

[vandezo]

when i use this fax for fax banking... it's always

" start again or the server no respone"

where it's the problem?

[yourownfree]

codes?

i dont know but is there a code or id that needs to happen as well when they handshake?

[costd]

Does the receiving fax happen to be VoIP?

[vandezo]

fax whit handset,
after the operator talk.. and then i'm input my password..
then i press the rxstart.........

displaying fax receiving...............
but..
the display indicate "start again" (there's in the local area)
or "no server respone" (interlocal)

[costd]

I confuse easily. RX stands for receive. TX is transmit.

1. Are you sending or receiving?

2. Humor me, does your iR3300 have a fax board installed?

3. I will check when I get to the office, but as well as I can remember, the iR3300 does not have a handset.

4. IF your have the fax board installed and are sending:
a. enter the number you are dialing
b. enter the number of pauses (commas) required to get past the operator
c. enter the password
d. push START

example: 18001234567,,,,password <START>


Sorry if I am way off base for what you are trying to do. Still have not had my morning coffee.