C5030 folding corners of the paper from all trays

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MFPTech
    Trusted Tech

    250+ Posts
    • Nov 2010
    • 486

    #1

    C5030 folding corners of the paper from all trays

    Have a C5030 (total counter 40K) that is folding corners of the paper from all trays, LT, LT-R, LG and Ledger ...
    Is this a paper issue or something on the machine side, please?

    Thanks in advance!
  • zoraldinho
    teacher-guide-expert-guru

    Site Contributor
    5,000+ Posts
    • Mar 2008
    • 5007

    #2
    Re: C5030 folding corners of the paper from all trays

    Something is on paper way.Make a force stop and find location.Problem solved in three minutes.
    If it ain't broke, don't fix it
    A picture is worth a thousand words

    Comment

    • MFPTech
      Trusted Tech

      250+ Posts
      • Nov 2010
      • 486

      #3
      Re: C5030 folding corners of the paper from all trays

      Please read the post, if there was something in the paper path then the corners of the short edge paper (LT-R and LG) wouldn't be the same as the corners of the long edge paper (LT, LD).

      thanks for the reply anyway.

      Comment

      • zoraldinho
        teacher-guide-expert-guru

        Site Contributor
        5,000+ Posts
        • Mar 2008
        • 5007

        #4
        Re: C5030 folding corners of the paper from all trays

        Originally posted by MFPTech
        Please read the post, if there was something in the paper path then the corners of the short edge paper (LT-R and LG) wouldn't be the same as the corners of the long edge paper (LT, LD).

        thanks for the reply anyway.
        Sorry.I was pissed off and drunk last night.Are we talking about advance series?
        If it ain't broke, don't fix it
        A picture is worth a thousand words

        Comment

        • mjarbar

          #5
          Re: C5030 folding corners of the paper from all trays

          I know these machines have an issue with the 2nd paper delivery assy. flapper on smaller sized papers due to the position of the ribs of the curved guide that feeds the paper towards the delivery tray.

          This is most evident if the paper is slightly curled upwards after coming out of the fuser.

          This could be a similar problem.

          Comment

          Working...