Canon iR1210 "ROM ERROR"

[livewire]

Hello,
I have a problem with Canon iR1210. Shows "ROM ERROR" on LCD.
In the service manual did not find solution.
Please help.


Thank you.

[montana]

Re: Canon iR1210 "ROM ERROR"

Hello,
I have a problem with Canon iR1210. Shows "ROM ERROR" on LCD.
In the service manual did not find solution.
Please help.


Thank you.

hi...i advise you to check the rom board if there is a loose or bad connections..

[teckat]

Re: Canon iR1210 "ROM ERROR"

Hello,
I have a problem with Canon iR1210. Shows "ROM ERROR" on LCD.
In the service manual did not find solution.
Please help.


Thank you.

Re-seat the ROM Dimm on the Image Processor board. If after re-seating the ROM Dimm on the Image Processor the Control Panel still displays 'ROM ERROR', try replacing the Image Processor ROM Dimm.

[livewire]

Re: Canon iR1210 "ROM ERROR"

Thanks for the quick reply.
I tried several times but get the same result.
In the catalog I got this number: FG6-9560-000 - DIMM ASSY.
I will speak with the client and will likely order.


Thank you.

[livewire]

Re: Canon iR1210 "ROM ERROR"

Hi, I changed Image Processor ROM Dimm, but now I get "System Error E247" message.

In this topic I found this:

http://www.copytechnet.com/forums/ca...tem-error.html

Error Code: E245, E246, E247, E354, E350, E355
Cause: Error with Serial Number PCB or Counter PCB or Main Controller PCB
Remarks: Please complete online form to order Controlled Parts via Dealer Net or Canon Intranet, and send to Information Management Group.

I think in this situation makes no sense to continue repairs.