Canon ImageRunner 4035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shorev
    • Jun 2025

    #1

    Canon ImageRunner 4035

    Hi Guys,I'm new to this forum, so hello everyone I have a quick question, we just leased two new Canon ImageRunner 4035 and we using SSO, we would like to know if there is a way that users will send a print job but the job will not be print out until they will type their user/passThanks in advance for any respond
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Canon ImageRunner 4035



    see page 115
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • shorev

      #3
      Re: Canon ImageRunner 4035

      Thank you very much for the respond! I found the local admin and now i can access the control panel.. the only thing that i cant understood is how I can change the print job setting like i said above?

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: Canon ImageRunner 4035

        When printing from the computer, you can set a password for printing (Secured
        Printing). You can prevent another user from taking the output by mistake or
        prevent outputs from being left behind because the print job cannot be started
        until the password is entered on the touch panel display of the machine. For more
        information, see e-Manual > Practical Workflows.

        imageRUNNER ADVANCE 4051/4045/4035/4025 e-Manual

        link
        http://support-sg.canon-asia.com/con...300763001.html

        Settings/Registration screen appears when you press (Settings/Registration) on the control panel.
        The machine provides various settings that enable you to use it more conveniently and easily. You can register or change the settings according to your needs-
        ------------------------------------------------------------------------------------------------------------------------------------------------
        Management Settings
        You can set the administrator settings for managing the machine. This enables you to set an ID and password for each department, manage confidential information, and count the number of pages printed for each ID. You can also register licenses and certificates.
        Changing Settings According to Your Needs
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • shorev

          #5
          Re: Canon ImageRunner 4035

          Thanks for the answer I know how to use the secured print, but we have been told that we can just send a simple printing to the machine without change any setting before any print from any user.. and then just type the AD user/pass and the print will be out.Any ideas?

          Comment

          • mkc1127

            #6
            Re: Canon ImageRunner 4035

            There is a software called uniflow which works exactly like you want but this is accessory so you need to purchase it.There are varies module in this pls consult with the sales person

            Comment

            • arielcanon
              Trusted Tech

              100+ Posts
              • Mar 2012
              • 106

              #7
              Re: Canon ImageRunner 4035

              open printer properties, under device settings tab, uncheck Departement ID management, press Apply > OK
              Learning never ends..
              Never give up, where there is a wheel there is a way..

              Comment

              • shorev

                #8
                Re: Canon ImageRunner 4035

                I will look for that, I hope that the ImageRunner 4035 is coming with something that built-in as we talked to the sales person and asked for that option in our printers.

                Comment

                Working...