If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
After Replacing HDD-----IRADVANCE
1) HDD format
1-1) Start with the safe mode.
(While pressing 2 and 8 keys simultaneously, turn ON the main power-switch.)
Im having a problem formating a new HD in any Advance series copier. When i hold 2-8 down it should come up with different options instead its just comin up with number 4 which is hd format but when i press it is comes up hd error but its a new hd. I have no idea whats going on.
Leave a comment: