Re: chip drum unit
thank you very much!!!! Mr teckat
chip drum unit
Collapse
X
-
Re: chip drum unit
The radio frequency chip on your photoconductor (drum unit) is shut down by the printer when it reaches the end of its fixed page life. If the print quality is still acceptable to you, you can reuse the drum by cleaning out the waste toner and then replacing the chip.
The chip will not fix any print defects, or improve print quality. It only resolves the “Replace Photocondcutor message"
Gently place new chip into photoconductor unit.
Note: pay attention to location of chip legs and gently push into place.
see---Epson photoconductor CHIP replacement.pdf
Attached FilesLeave a comment:
-
chip drum unit
sorry in advance for this post, but I need the opinion of the best technician of the world
someone Knows to replace the chip drum unit for use in epson aculaser c 1100 has a special position
I look forward to your answer
all the best
Ernesto
chip drum unit epson aculaser c1100.jpgTags: None
Leave a comment: