Canon IRC3220

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dean
    Technician
    • Feb 2007
    • 19

    #1

    Canon IRC3220

    I am trying to set up the print on the Imagepass c2. When I go into the setup it asks for a password. Is there a default password for this unit? or is there a way to reset the imagepass?

    Thanks

    Dean
  • lkrsardis
    Trusted Tech

    250+ Posts
    • Dec 2007
    • 316

    #2
    c2

    Sorry, you have to format the hard drive and reload the C2 system software This is per Canon.
    Like the United States Postal Service It's a miracle it works!

    Comment

    • OtherTech
      Technician

      50+ Posts
      • Aug 2007
      • 94

      #3
      Try Fiery.1 This is what works for us here

      Comment

      • lkrsardis
        Trusted Tech

        250+ Posts
        • Dec 2007
        • 316

        #4
        password

        OtherTech is right, Fiery1 is the default password for the C2. If that doesn't work you have to reload the C2 software.
        Like the United States Postal Service It's a miracle it works!

        Comment

        • OtherTech
          Technician

          50+ Posts
          • Aug 2007
          • 94

          #5
          When you use Fiery.1 the F must be in caps

          Comment

          • lkrsardis
            Trusted Tech

            250+ Posts
            • Dec 2007
            • 316

            #6
            c1

            The imagepass C1 has to be reloaded as there is no default password.
            Like the United States Postal Service It's a miracle it works!

            Comment

            Working...