IRA 2020L

[spectraindo]

Re: IRA 2020L

I have done this and it works :

Go to Service Mode > COPIER > OPTION > NETWORK > RAW-DATA change to 1 (no image processing).
Turn off the machine and then back On.
Good luck.

[disam]

Re: IRA 2020L

I have done this and it works :

Go to Service Mode > COPIER > OPTION > NETWORK > RAW-DATA change to 1 (no image processing).
Turn off the machine and then back On.
Good luck.

Hi

try also this, without changing something in the Service Mode.

Printer Driver (only UFR II) - Driver Settings - finishing - advanced Settings - always rastering on host - Change from off to on.

[Master General]

Re: IRA 2020L

I have done this and it works :

Go to Service Mode > COPIER > OPTION > NETWORK > RAW-DATA change to 1 (no image processing).
Turn off the machine and then back On.
Good luck.

Hi try also this, without changing something in the Service Mode.

Printer Driver (only UFR II) - Driver Settings - finishing - advanced Settings - always rastering on host - Change from off to on.

Thank you very much guys! Everything works fine. Even 120Mb JPEG on A3 printed without problems. I've tried both methods to fix problem. First in service menu, then in UFRII driver settings.

[Benjamin98]

Re: IRA 2020L

This is the latest driver version if anyone is wanting it i.e. v21.52:

Canon UFR II/ UFRII LT Printer Driver