How to set paper sizes for the paper drawers on IRC 6010

[Guest]

Hi I just want to know how to set the paper sizes for the drawers on the Canon IRC 6010.
Right now the copier only detects A4 and A3 on the drawers. I want to set drawer 1 to LTR size and Drawer 3 to LGL size.
Thanks in advance.

[browny]

Re: How to set paper sizes for the paper drawers on IRC 6010

Hi ! could you check to make sure what model of that machine....I don't think CANON have that model yet...

[garygallardo]

Re: How to set paper sizes for the paper drawers on IRC 6010

My Fault it say iR6010

[vigour]

Re: How to set paper sizes for the paper drawers on IRC 6010

I think it is the same as the 6800
You have to push a hidden switch and set thr dial to letter or whatever
there is a diagram in the following link

http://www.copytechnet.com/forums/ca...djustment.html\

Take me to Lanikai

[garygallardo]

Re: How to set paper sizes for the paper drawers on IRC 6010

Thanks, I was able to set the correct paper size on drawer.

I went to service mode > option > cst and change the values for Drawer 1.