Little black spots on iR 1750.

[Ingranaggio_rotto]

Hello everyone!
I'm back!

I have this problem to be asked:

iR 1750 with small black spots ...
I've done all the updates (ECONT 10.01, and adjustment of the fixing temperature), but no, I have no improvements ...



Suggestions?


Thank you.

[teckat]

Re: Little black spots on iR 1750.

Hello everyone!
I'm back!

I have this problem to be asked:

iR 1750 with small black spots ...
I've done all the updates (ECONT 10.01, and adjustment of the fixing temperature), but no, I have no improvements ...



Suggestions?


Thank you.

Make sure the Transfer Roller is making good contact with the bias tab.

See following photo:




Open the right door, and remove the Transfer Roller. Try to reform the tab up, to make better contact with
the contact on the Transfer roller (following picture).