Canon IR 7105

[manuelubau]

I have a Canon IR 7105 that is jamming a lot when I start copying. I try to copy one-sided copies but the machine seems to process them as if they were two sided. What I mean is that after the copies go through the fusion unit, they try to go down to the unit that process two sided copies but they get jammed there.

Any ideas?

[Rachid.Akli]

Re: Canon IR 7105

Hi,

This is a normal operation. The machine procceds this way to have face down prints. For the jams, it would be helpful if you send the jam code.

RAchid.

[manuelubau]

Re: Canon IR 7105

Hi,

This is a normal operation. The machine procceds this way to have face down prints. For the jams, it would be helpful if you send the jam code.

RAchid.

Oh I see... just looked at the jam code it says it is 010C

[Rachid.Akli]

Re: Canon IR 7105

Oh I see... just looked at the jam code it says it is 010C

Hello,

010C is a delay jam at sensor PS10. Verify the paper path, paper guides ...


Rachid.Sensor locations.pdf

[manuelubau]

Re: Canon IR 7105

Hello,

010C is a delay jam at sensor PS10. Verify the paper path, paper guides ...


Rachid.[ATTACH]17477[/ATTACH]

I also found that it also marks the jam code 1107

[Rachid.Akli]

Re: Canon IR 7105

I also found that it also marks the jam code 1107

1107: Stationnary jam at the entrance of the finisher. Paper doesn't leave sensor UN13 in the required time interval.

Rachid.

Saddle_Finisher_V2_SM-FR1007.pdf

[Rachid.Akli]

Re: Canon IR 7105

To get a jam error details, enter Service mode> Copier > Disolay > Jam > select your jam.

Rachid.