CANON IR c2880 Jamming at registration.

[rexctacy]

Re: CANON IR c2880 Jamming at registration.

First step is to replace the pick up, feed & separation roller, cleaning helps but is only a quick fix.

The registration flag can wear down if it is the old plastic type (it has been modified with a metal tip)

Also check the cassette dial is set to the correct size. e.g if the tray has A4 paper in & the dial is set to A4R the machine will jam.

I can supply you with said parts if rquired, as a test you can swap the rollers from another port, e.g A3 is not used as much & rollers are usually not worn.

hi there, thankyou everyone for your helpful info. i tried replacing the roller from the lower cassette (A3) but i looked like the last tech that looked at it had already swapped over rollers. the flag is the plastic type without the metal tip. cassette dial was set correctly. does anyone have the part numbers for the pickup, feed and sep rollers? also the part number for the registration switch (new modified part).

i was also reading teckat's post about replacing the right lower door assembly. ithink the machine needs this mod aswell. the serial number is JVB00***

[teckat]

Re: CANON IR c2880 Jamming at registration.

2- Cassette feed rollers / FC6-7083-000
2-Cassette separation rollers / FC6-6661-000


registration switch ???

[rexctacy]

Re: CANON IR c2880 Jamming at registration.

2- Cassette feed rollers / FC6-7083-000
2-Cassette separation rollers / FC6-6661-000


registration switch ???

Sorry, registration flag sensor

[rexctacy]

Re: CANON IR c2880 Jamming at registration.

sorry to be a pain in the ass but
does anyone have the service and parts manual for this machine.
we have access to the cipg manuals but not the bisg.

[Canon.Tech]

Re: CANON IR c2880 Jamming at registration.

I have PM'ed you the manuals

[rexctacy]

Re: CANON IR c2880 Jamming at registration.

thanks for doing that.
it is slow but i will eventually get what i wanted so i cant complain.

[Canon.Tech]

Re: CANON IR c2880 Jamming at registration.

No worries.

Seems to be faster if you right click the link & choose "save file as" rather than click on the lick & wait for it to open.

[rexctacy]

Re: CANON IR c2880 Jamming at registration.

Problem is now sorted. thanks goes out to all that have helped me.
customer is stoked.
thread can now be closed
solved

[teckat]

Re: CANON IR c2880 Jamming at registration.

Problem is now sorted. thanks goes out to all that have helped me.
customer is stoked.
thread can now be closed
solved

explain what procedures u did ???/

threads are never closed-------------

[rexctacy]

Re: CANON IR c2880 Jamming at registration.

replaced feed and separation rollers in cassettes. fitted modded lower right inner door assembly and also replaced registration flag sensor. machine tested ok

[canontech1]

Re: CANON IR c2880 Jamming at registration.

thanks for this thread it helped