CANON CLC 2620

[aoseikwame]

Try to print but is giving me "waiting to print" on screen. Any ideas. Thanks

[charm5496]

Re: CANON CLC 2620

fuser might not be at a ready state.....check the connector where the fuser tray plugs into the machine. it could be cracked causing a poor connection.
I would also pull your back panel off and clean out your main controller and then reseat all the board and memory DIMM's

Have you tried opening and reseating the the doors on the device?

does it do the same thing after rebooting the device?

[teckat]

Re: CANON CLC 2620

Try to print but is giving me "waiting to print" on screen. Any ideas. Thanks

"waiting to print"/

usually a memory issue/ remove>clean ends>re-seat-

or if u are using a Fiery (imagePass)--
check the Open Interface Cable>>remove>inspect>re-connect

power off/on check if u can make glass copies -????
if not follow charm5496's info