[Misc] System Software for Canon iR1023 needed.

[moicez]

Hi, I am in need of the system software for the iR1023.

Also who knows what you need to add the universal send to this same machines?

moicez@gmail.com

[teckat]

Re: System Software for Canon iR1023 needed.

Hi, I am in need of the system software for the iR1023.

Also who knows what you need to add the universal send to this same machines?

moicez@gmail.com

imageRUNNER 1023

Network printing requires the optional Network Interface Adapter-IN-E11 on the imageRUNNER 1023 model.

Send/Fax capability is only available on the imageRUNNER 1023iF model.

[moicez]

Re: System Software for Canon iR1023 needed.

imageRUNNER 1023

Network printing requires the optional Network Interface Adapter-IN-E11 on the imageRUNNER 1023 model.

Send/Fax capability is only available on the imageRUNNER 1023iF model.

Hmm... Interesting, I have several 1023iF that print and fax but no universal send...

Thank you.

[teckat]

Re: System Software for Canon iR1023 needed.

Hmm... Interesting, I have several 1023iF that print and fax but no universal send...

Thank you.

see pdf

[KL568]

Re: System Software for Canon iR1023 needed.

Hmm... Interesting, I have several 1023iF that print and fax but no universal send...

Thank you.

Hi, moicez

Make physical comparison between iR1023 / iR1023F (if such model exists) AND iR1023iF.

You notice there are 3 oval button, if the center button has a word "SEND" then that one has Send function to Shared folder / FTP folder / Email destinations


"i" in iR10xxiF denote i-Send function, however if the model you looking at has "SEND" button but do not have seting or allow you to configure Sending, then it could have a firmware issue OR it has hardware failure.

[teckat]

Re: System Software for Canon iR1023 needed.

Send/Fax capability is only available on the imageRUNNER 1023iF model.

[moicez]

Re: System Software for Canon iR1023 needed.

Thank you all for your response.

I have a iR 1025iF and when I press the SEND button "FaxOnly" is displayed on the LCD. With your input I have come to think that there is a problem with the machines. I will continue investigating the problem and report back with my findings, but i doubt that without the system software I will be able to do much.

[teckat]

Re: System Software for Canon iR1023 needed.

Thank you all for your response.

I have a iR 1025iF and when I press the SEND button "FaxOnly" is displayed on the LCD. With your input I have come to think that there is a problem with the machines. I will continue investigating the problem and report back with my findings, but i doubt that without the system software I will be able to do much.

iR1023iF/iR1025iF =
Standard -Sending Method: E-Mail, I-Fax, Fax, File Server (FTP/SMB)


Machine is not recognizing the Send
Check the USB Drive on rear of machine .
Verify when powered on that the led is lit on the USB drive.
Also check the Network I/F PCB


The imageRUNNER 1023iF/1025iF is capable of push scanning both color and black and white documents to an email address or file server destination. When sending a fax or i-fax, color scanning is not an option.

To send in Color to an email address or file server select PDF (compact) or JPEG as the file format.
To send in B&W to an email address or file server select TIFF or PDF as the file format-


IR1023iF/1025iF
Sending a Color and B&W Document

1. Place the document on the platen glass or load it in the ADF.

2. Press [Send]

3. Press [<-] or [->] arrow buttons to select the sending method, then press OK

*NOTE - If sending to a File Server (FTP) or (SMB) you need to select Email (B&W) or E-mail (Color)

4. Specify the destination.
This can be done by using the Numeric Keys, One-Touch Buttons, Coded Dial Codes, Group Addresses, Address Book key, or Favorite Buttons.

5. Press OK

6. Press [<-] or [->] arrow buttons to select the file format, then press OK.
E-mail (B&W): PDF or TIFF
E-mail (Color): JPEG or PDF (Compact)

If you have specified an i-fax address in step 4, this setting is NOT available. The file format is automatically set to <TIFF (B&W)> when sending an ifax .

NOTE: If you are sending to a file server (SMB or FTP) but did not select a sending method in step 3, your only file formats available will be TIFF and PDF for B&W sending. Therefore, if you want to send a color document to a file server (SMB or FTP) select E-mail (Color) in step 3.

7. Press [<-] or [->] arrow buttons to select On or OFF for Divide into Pages option then press OK
OFF = Sends multiple images as a single file without dividing them.
ON = Separates multiple images and sends them as separate files.

If you have selected JPEG in step 6, this setting is not available. Divide Into Pages is automatically set to ON when sending as a JPEG.

8. Press [<-] or [->] arrow buttons to select the desired resolution available, then press OK.
If PDF Compact is selected as the file format only 300x300 dpi can be selected for sending.

9. Press [<-] or [->] arrow buttons to select the original type, the press OK.
Options are Text, Photo, Text/Photo.
If you have selected PDF Compact the Original Type is automatically selected to Text/Photo.

10. Press Start to begin sending.


There are 4 favorites buttons available that can be configured in the RUI.
The Favorite buttons allow you to predefine Sending Location, File Format, Resolution, Divide into Pages, and Original Type options.

The default send settings can also be changed for the iR1023iF via the RUI or the Control Panel.
RUI: Additional Functions > Common Settings > Send /Receive > Common > TX Settings
Control Panel: Additional Functions >TX/RX Settings > Common > TX Settings > Standard Settings

Here a user can preselect a File Format, Resolution, Density and Original type to be used when sending to an E-mail or File server. These settings will take effect if a user walks up to the iR and selects their sending address and Start without following the steps above.

[KL568]

Re: System Software for Canon iR1023 needed.

Hi, moicez

You might be correct on your last statement of an update.

Print out the machine user data list, on the last page, you ought to see some info about "Main" and another item "Boot". What is Version of both?

[moicez]

Re: System Software for Canon iR1023 needed.

Hi, moicez

You might be correct on your last statement of an update.

Print out the machine user data list, on the last page, you ought to see some info about "Main" and another item "Boot". What is Version of both?

Well, I have tried changing the USB flash drive on the back and it still says FaxOnly.

On the User Data List:

Main: WLaa-10-01
Boot: WLaa-07-01

Thank you very much for your help.