[Jamming] Jam Code 0B00 - IR7086

[canonbundy]

Hi All, has anyone had this problem before? I have an IR7086 box which has produced approx 5M prints, the unit can be printing for 2hrs and will jam intermittently with an 0B00 code - when highlighting the Jam Code in Srv Mode it displays SENSOR - no code, I have checked out the Service Info & directs to an opening/closing of a door (upper right, lower right, bypass cover, front door) all of which appear ok, also to check transport lift Cam for breakage/cracks and also Flag vibration etc to PS28, I have replaced the Cam (no cracks) and PS28, also checked the connectors at the rear of the machine for possible bits of paper which may cause a false reading to the MB. Any input to what I have already tried would be greatly appreciated.

Thanks Cliff.

[Rachid.Akli]

Re: Jam Code 0B00 - IR7086

Verify, clean or replace the following door open/close sensors:

PS48: right lower door sensor. FK2-0149-000 P005-9 1: closed.
PS58: right upper door sensor. FK2-0149-000 P005-8 1: closed.



Rachid.

[lorddincer]

Re: Jam Code 0B00 - IR7086

Hi dears I have got same problem(0B00)I checked doors sensor everything is normal. is there any other solve.