E584 switch MS3 & MS4 on N1 finisher

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Discount Printing Service
    Technician
    • Mar 2009
    • 36
    #1

    E584 switch MS3 & MS4 on N1 finisher

    I got a C3220 with a N1 finisher throwing error code E-000584-0003, service manual page 989 refers to switch MS3 & MS4 on the finisher (N1) can someone tell me where those are or post a parts diagram of the switch? I don't have a copy of the parts breakdown of the N1.

    Thanks,
    John
    Thanks,
    John M
    DPS
    Senior Field Technician
    Tags: None
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      2,500+ Posts
      • Mar 2008
      • 4972
      #2
      Re: E584 switch MS3 & MS4 on N1 finisher

      This one is for irc 4080.I hope it's the same.
      Attached Files
      Practice makes perfect
      If it ain't broke, don't fix it
      A picture is worth a thousand words
      If you want something done right, you have to do it yourself

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16092
          #3
          Re: E584 switch MS3 & MS4 on N1 finisher

          Originally posted by discount printing service
          i got a c3220 with a n1 finisher throwing error code e-000584-0003, service manual page 989 refers to switch ms3 & ms4 on the finisher (n1) can someone tell me where those are or post a parts diagram of the switch? I don't have a copy of the parts breakdown of the n1.

          Thanks,
          john
          ms3

          MS3.JPGMS3_.JPG

          wc4-5130-000


          ms4
          Attached Files
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • Canon.Tech
              Trusted Tech
              • Mar 2009
              • 335
              #4
              Re: E584 switch MS3 & MS4 on N1 finisher

              E584.pdf

              Seen this a few times, 9 times out of 10 it is the cam slipping
              FB3-7298-000

                Comment

                Previous template Next
                Working...