If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a problem with iR2016, reports paper jam but no paper.
I Put a new firmware but the same problem..
Jam 0104 =Incorrect paper size message or pickup delay jam 0104
is this from all cassettes all paper sizes
Cassette Feed Clutch's
replacing the 27T/50T Gear (FB6-1633-000) with 40T/50T Gear (FC6-4390-000) in the cassette 1 Paper Pick-Up Assembly correctsthe problem.
By only updating Cassette 1 Paper Pick-up Assembly a mis-match will be created. To resolve this issue Cassette 2 Paper Pick-up Assembly had to be replaced with an updated Paper Pick-up Assembly { FM2-4484-010 } which comes with Six additional teeth in drive gears to speed up drive and to reduce the chances of delay jams.
Please note: Gears in cassette 1 Paper Pick-up assembly will not work in Cassette. 2 Paper Pick-up Assembly.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment