Changing Fuser on CLC5151 what do i need to know?

[gestetner tech]

Anyone have some information how to change the fuser on a Canon CLC 5151.
Are there any thing that needs to reset in machine?
Thanks
Lars im GestetnerTech

[Gamut]

Re: Changing Fuser on CLC5151 what do i need to know?

Remove old fuser (black cover=2 screws + 4 retaining screws) take motor assembly off old and fit to new fuser.

Zero fixing counter and run FX-UHP and FX-LHP in service mode job done.

[gestetner tech]

Re: Changing Fuser on CLC5151 what do i need to know?

Hi Thanks for the help. All went ok. with fuser exchange
Now the Customer wants me to replace the drums!
Are they self reseting the counters? Any adjustments to do?
Regards Lars

[Canon.Tech]

Re: Changing Fuser on CLC5151 what do i need to know?

Wow this is going to be a big bill for your customer!?

Noting to re-set just fit the drums, then do an auto gradation.

While you're there fit a new set of feed rollers, then that machine is good to go for a while.

[gestetner tech]

Re: Changing Fuser on CLC5151 what do i need to know?

Thanks
yes Big Bill
regards
Lars