[Electrical] CANON GP335 problem !!!!

[sweet.persona]

Hi to all.

i have canon gp335 , when i turn On the machine it Doesn't warm up , and There is Nothing shown in the LCD screen ,there is only a green led !



thanks in advance.

[JustManuals]

Re: CANON GP335 problem !!!!

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[COPIERTEC ASSOCIATES]

Re: CANON GP335 problem !!!!

On the main controller pcb which is below the scanner unit and adjacent to the lens(CCD unit),there are two fuses on the pcb and one of them is open.Try to fix it and the machine will open up.

[sweet.persona]

Re: CANON GP335 problem !!!!

I have asked one from my CANON tech friends and they told me that the IP card is faulty and told me that must be change new IP card ! i want more Idea .



Thank u in advance.

[seniortech]

DC power supply

[spectraindo]

Re: CANON GP335 problem !!!!

I have had many problems like that because of BAD IP Board, check the Fuses, if OK replace IP Board.

[gb15875]

Re: CANON GP335 problem !!!!

CHANGE SUB P.SYPPLY

[JustManuals]

Re: CANON GP335 problem !!!!

sweet.persona..........Send an email to me at Paul@justmanuals.com and I'll send you a free copy of the service and parts manual. Tis the season you know.

Paul@justmanuals.com

[sweet.persona]

Re: CANON GP335 problem !!!!

thank u friend Paul i have recived the Message

[Canon.Tech]

Re: CANON GP335 problem !!!!

Also have to check the machine is not in download mode!?

Tiny dip switch inside from cover, behind a small panel?

[sweet.persona]

Re: CANON GP335 problem !!!!

u mean this switch In the image beneath ! but last day i replace new IP BOARD and the machine was worked well!!! how i can flashing the first IP BOARD if i can !

05-12-2012 22-40-51.jpg Thank u to all in advance

[teckat]

Re: CANON GP335 problem !!!!

sweet.persona..........Send an email to me at Paul@justmanuals.com and I'll send you a free copy of the service and parts manual. Tis the season you know.

Paul@justmanuals.com

dancing-santa.gif

[Peter Sim]

Re: CANON GP335 problem !!!!

u mean this switch In the image beneath ! but last day i replace new IP BOARD and the machine was worked well!!! how i can flashing the first IP BOARD if i can !

[ATTACH=CONFIG]18504[/ATTACH] Thank u to all in advance

You cannot doing anything before the board is "alive"again.You can only replace the two tiny fuse on the ip board .If the fuse is ok ,than your IP board is dead.

[sweet.persona]

Re: CANON GP335 problem !!!!

Hi

I have tested the two tiny fuse on the ip board it was well , There is No solution in it!!

[teckat]

Re: CANON GP335 problem !!!!

Hi

I have tested the two tiny fuse on the ip board it was well , There is No solution in it!!

what have u done to check for proper voltage supply---
from Outlet to Printer -from printer AC side > to DC Output side in printer