clc 1100

[T911]

e072-0202. reinstalled springs on attraction cam solenoids but still tripping the code sometimes and jamming at transfer. any ideas appreciated. thanks t

[Van Steal]

Hi

You need to replace the transfer driver pcb and the motor (pm7) inside the transfer drum. Make sure you replace the two at the same time!!


PS E072 0002 is the transfer cleaning brush ass'y, again you need to replace the ass'y and not the motor

Good Luck

[T911]

thanks van i'll give that a go.

[OtherTech]

Try cleaning and putting a drop of lube on end shafts of cleaning brush and bushings.