problem on 2 sided printing on IR2830

[pengtech]

Hi, I have problem on IR2830. The problem is when printing 2 sided, page 1 & 2 is ok, but the subsequent odd pages are blank and the even pages are ok. After the pages have come out, the copier still processing showing coping, after a while it restart itself showing E240-000d.
Single side printing is ok. I have changed HDD, MMI & RAM clear. I also changed the system board and DC board.
Same problem printing from PC. I have tried using feeder and glass scanning, interchanged cassettes.
Any suggestions.. Thanks.

[zoraldinho]

Re: problem on 2 sided printing on IR2830

Inspect ribbon and other cables and connectors.Clean and re-seat memory.

[Tonersniffer]

Re: problem on 2 sided printing on IR2830

Inspect ribbon and other cables and connectors.Clean and re-seat memory.

Old post but I just had same problem. When the duplex clutch fires it causes electrical noise. Had a e240-005 and 733-010 code in history after reseting printer. Same jamming .

Replaced duplex clutch FH6-5005-020 and problem stopped.

Hope this helps someone.

Canon knowledge base does have something on this.

Tom