Upgrading firmware on Canon IR 2520

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Guest
    #1

    [Electrical] Upgrading firmware on Canon IR 2520

    Hello
    Today i was upgrading main firmware, boot,... on new ir 2520. When i was install accros ust main firmware, machine reboot properly and wake up normaly. When i was instal boot,accros ust, download firmware on machin good, then machine installation was fine and when was machine rebooting start machine turning off on main switch for on- off. Than i was pul out one cable on main controller and machine start normaly. Normaly coping, network printing,.. everything work properly. I install these cable in and turn machine on and machine again turn off on main switch. Have anyone had same problem? Anyone have some solution or proposal? Thanks and have a nice happy december.
    Tags: None
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Upgrading firmware on Canon IR 2520

      Originally posted by E-Maintenance
      Hello
      Today i was upgrading main firmware, boot,... on new ir 2520. When i was install accros ust main firmware, machine reboot properly and wake up normaly. When i was instal boot,accros ust, download firmware on machin good, then machine installation was fine and when was machine rebooting start machine turning off on main switch for on- off. Than i was pul out one cable on main controller and machine start normaly. Normaly coping, network printing,.. everything work properly. I install these cable in and turn machine on and machine again turn off on main switch. Have anyone had same problem? Anyone have some solution or proposal? Thanks and have a nice happy december.

      Looks like another graduate of the Zaza school of English Linguistics. WTF?

        Comment

        • Guest
          #3
          Re: Upgrading firmware on Canon IR 2520

          Originally posted by manuals4you
          Looks like another graduate of the Zaza school of English Linguistics. WTF?


          Thanks for helping me manuals3you.... I already solved the problem...

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: Upgrading firmware on Canon IR 2520

              Originally posted by E-Maintenance
              Hello
              Today i was upgrading main firmware, boot,... on new ir 2520. When i was install accros ust main firmware, machine reboot properly and wake up normaly. When i was instal boot,accros ust, download firmware on machin good, then machine installation was fine and when was machine rebooting start machine turning off on main switch for on- off. Than i was pul out one cable on main controller and machine start normaly. Normaly coping, network printing,.. everything work properly. I install these cable in and turn machine on and machine again turn off on main switch. Have anyone had same problem? Anyone have some solution or proposal? Thanks and have a nice happy december.



              re-launch the firmware flash and follow this order of flashing machine.
              1. Flash BOOT
              2. Flash SYSTEM
              3. Flash Language
              4. Cycle power and let machine boot normally.
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Previous template Next
                Working...