IR 6000 DADF-D1

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ar6565
    Technician

    50+ Posts
    • Apr 2008
    • 94
    #1

    IR 6000 DADF-D1

    DADF feeder:
    Tags: None
    • canonbundy
      Senior Tech

      500+ Posts
      • Jun 2012
      • 607
      #2
      Re: IR 6000 DADF-D1

      Originally posted by ar6565
      DADF feeder:
      Yes?

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: IR 6000 DADF-D1

          Originally posted by ar6565
          DADF feeder:
          see your other same post for a gift
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • ar6565
              Technician

              50+ Posts
              • Apr 2008
              • 94
              #4
              Re: IR 6000 DADF-D1

              Thanks by adjusting the Position of the side guide plate of the ADf & using the DOCST in Service Mode.
              Also the LA-SPEED to get the exact size of the frame in copy paper as the orignal (Service Mode).
              Thanks for help.

                Comment

                • teckat
                  Field Supervisor

                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16083
                  #5
                  Re: IR 6000 DADF-D1

                  Originally posted by ar6565
                  Thanks by adjusting the Position of the side guide plate of the ADf & using the DOCST in Service Mode.
                  Also the LA-SPEED to get the exact size of the frame in copy paper as the orignal (Service Mode).
                  Thanks for help.
                  ELVIS.jpgwelcome
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    Previous template Next
                    Working...