please help my canon ir 3570 if power on always show e00001 and must clear error
-
-
Re: ir 3570 error e00001
The temperature of the fixing assembly is abnormally high.
-001=0001 /////main thermistor or dc pcb
1-While start up control is under way, the reading of the main thermistor is less than 30 deg C
continuously for 200 msec or more 1 sec after the start of power supply.
2-While start up control is under way, the reading of the main thermistor is less than 70 deg C
continuously for 200 msec or more 2 sec after the start of power supply.
3-While start up control is under way, the reading of the main thermistor is less than 120 deg C
continuously for 200 msec 6 sec after the start of power supply.
4-The start up control does not end 30 sec after the start of power supply.
best to remove fix unit first to inspect----------
in service mode
1) Press the asterisk key (Additional Functions key) "*" on the control panel.
2) Press the 2 and 8 keys of the keypad at the same time.
3) Press the asterisk key (Additional Functions key) "*" on the control panel.
PANEL (Medium).JPG
On Initial screen select in order----------
COPIER>FUNCTION>CLEAR>ERR
OK ! POWER OFF/ON PRINTER**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment