[Misc] DADF -AD1 on IRADV6065 Limited function

[rayjeek]

Above in limited fuction, Feeder unavailable message on screen. Checked Feeder option missing from service mode.
Feeder not recognised at all. Checked cables ok. Any info from someone will be appreciated.

[rayjeek]

Re: DADF -AD1 on IRADV6065 Limited function

Above in limited function, Feeder unavailable message on screen. Checked Feeder option missing from service mode.
Feeder not detected at all. Checked cables ok. Any info from someone will be appreciated.

To add to my above post, have also found error code E0400-0002 in log.

Disconnected DADF and switch on, copier detected that DADF was not connected. Switch off copier again plugged in DADf connector and power on again but DADF never appeared as installed. Am just suspecting an open circuit in DADF driver pcb.

Where are the Copier Gurus ??????

[CanoNiR]

Re: DADF -AD1 on IRADV6065 Limited function

Reception error occurs at the time of communication between
the Reader Controller PCB and the DADF.
1. Connection error between the DADF Driver PCB (PCB1)
and the Reader Controller PCB (PCB1).
2. Failure of the DADF Driver PCB (PCB1).
3. Failure of the Reader Controller PCB (PCB1).

[rayjeek]

Re: DADF -AD1 on IRADV6065 Limited function

Thi problem sorted: replaced dadf driver pcb and dadf document input tray cable. Thanks