If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need the part # for the gear that is directly driven by the paper feed /vertical roller motor. Its the motor directly behind HV assy. The motor gear has worn down the teeth on the gear. IR7105. Thanks
I need the part # for the gear that is directly driven by the paper feed /vertical roller motor. Its the motor directly behind HV assy. The motor gear has worn down the teeth on the gear. IR7105. Thanks
u mean M2 Pick-Up motor ??? / #18 GEAR FS7-0035-020 / GEAR, 68T
I need the part # for the gear that is directly driven by the paper feed /vertical roller motor. Its the motor directly behind HV assy. The motor gear has worn down the teeth on the gear. IR7105. Thanks
Comment