Canon C5185 E000110-0205 error code please help

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083
    #16
    Re: Canon C5185 E000110-0205 error code please help

    Originally posted by crwoo
    Ok one of the connectors wasnt totally secured after replacement. now the machine works great.
    THanks for all the help guys. should i throw the bad laser away or does anybody want it.
    did u run FULL AUTO GRADATION & Calibrate Fiery if attached after Laser replacement ?
    did u Print out a new P PRINT to leave by printer or give to key op ??



    Shovel crap.jpgOLD LASER FIND HERE-
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      • crwoo
        Technician
        50+ Posts
        • Jan 2010
        • 76
        #17
        Re: Canon C5185 E000110-0205 error code please help

        I did a full gradient and fiery calibration, but i dont know how to make a P Print, How do i do that?

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083
            #18
            Re: Canon C5185 E000110-0205 error code please help

            Originally posted by crwoo
            I did a full gradient and fiery calibration, but i dont know how to make a P Print, How do i do that?
            go in service mode------------

            (*add functions key)(#2,#8 key together)(*add functions key)


            COPIER > Function > MISC-P > P-PRINT

            P PRINT has the Printer settings (DCON/RCON/)


            another important ?
            did u read posted pdf and put in the label settings from new Laser in service mode ??

            When the laser unit is replaced, use the appropriate service mode (with the corresponding color) to enter the values shown on the label affixed on the top of the new laser unit.

            it is in service mode-------------------

            Laser Manufacturer ID:
            [1]COPIER > ADJUST > LASER > LA-MK-Y/M/C/K
            Laser Magnification:
            [2]COPIER > ADJUST > LASER > LDADJ1-Y/M/C/K
            [3]COPIER > ADJUST > LASER > LDADJ2-Y/M/C/K
            [4]COPIER > ADJUST > LASER > LDADJ3-Y/M/C/K
            Laser Phase Difference:
            [5]COPIER > ADJUST > LASER > LDADJ4-Y/M/C/K
            [6]COPIER > ADJUST > LASER > LDADJ5-Y/M/C/K
            [7]COPIER > ADJUST > LASER > LDADJ6-Y/M/C/K
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

              Comment

              • crwoo
                Technician
                50+ Posts
                • Jan 2010
                • 76
                #19
                Re: Canon C5185 E000110-0205 error code please help

                OK thanks i will do that.
                Yes i followed the procedure for the new laser. the magenta colors looked out of focus before i did it and look nice and sharp now.

                Thanks for the help

                  Comment

                  • Cycle Clutch
                    Technician
                    • Feb 2013
                    • 25
                    #20
                    Re: Canon C5185 E000110-0205 error code please help

                    Good idea to have P-print with copier. Also print a User Data List for network settings.

                      Comment

                      Previous 1 2 template Next
                      Working...