please the error code is E000004 0001, i have fixed a new fuser unite but still get the same error code any help. thanks
-
-
Re: canon irc 2570
make sure the front panel actuator has not interfered with and detached the front
panel sensor (PS22)
visually inspect the front panel actuator to make sure that it does not
interfere with the sensor
Check the door actuating switch MS3. If the switch is in the fully actuated state even with the right door open this code has been present. The solution was to loosen or remove the 2 screws holding the metal switch actuating cover which is located behind the plastic inner cover =reposition the metal cover**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment