ir3245 cassette no 3

[mido]

Hi all,
I have an IR 3245 with four cassettes, the cassette no. 3, didn't lift the paper, and always the screen displays add paper, the cassette no. 4 is working good.
I checked the push bottom switches, press them manually that the cassettes push them when closed, but no response occurred,
any idea about this problem please,

[mido]

Re: ir3245 cassette no 3

Hi all,
I have an IR 3245 with four cassettes, the cassette no. 3, didn't lift the paper, and always the screen displays add paper, the cassette no. 4 is working good.
I checked the push bottom switches, press them manually that the cassettes push them when closed, but no response occurred,
any idea about this problem please,

Hi guys
Nobody have reply about my problem..........
If the problem not clear please let me know to explain more.

Regards

[Luther]

Re: ir3245 cassette no 3

remove the cassette and check to see if paper is caught behind it

[mido]

Re: ir3245 cassette no 3

remove the cassette and check to see if paper is caught behind it

thank you for your reply,
no paper behind the cassette.

[blazebusiness]

Re: ir3245 cassette no 3

thank you for your reply,
no paper behind the cassette.

Have you taken apart the paper pickup assembly to diagnose the problem yet? Replace the whole Paper Pickup assy or remove and disassemble the paper pickup assembly that's not working to find the part that has failed and replace it. Obviously it's cheaper to diagnose and repair the assembly in the copier rather than replace the whole unit.

[charm5496]

Re: ir3245 cassette no 3

the cassette feed unit is nothing but plastic with plastic gears. If the ratch gears are not lifting the cassette plate then you may want to check the drive in back of the feed unit. I replace the entire assembly when they break as the cost is not worth repairing.

[mido]

Re: ir3245 cassette no 3

the cassette feed unit is nothing but plastic with plastic gears. If the ratch gears are not lifting the cassette plate then you may want to check the drive in back of the feed unit. I replace the entire assembly when they break as the cost is not worth repairing.

.

Hi to all,
I solved the problem, this is the first time occurred with me, anyway I want to tell everybody what I found:
the cables between the cassette size sensor pcb no. 3 and the pcb in the pedestal cutoff.20130223_103035.jpg20130227_105339.jpg20130227_104532.jpg

Regards