Canon downloader PCB tool Do we need this for the imageRunner line anymore?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Simons
    Trusted Tech
    • Jun 2008
    • 490
    #1

    Canon downloader PCB tool Do we need this for the imageRunner line anymore?

    Do we need it for the imageRunner line anymore? 5000 ? 5570 ? Im ready to obtain one from someone who cares to sell if I need it. 330's are dead...
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Canon downloader PCB tool Do we need this for the imageRunner line anymore?

      Originally posted by Simons
      Do we need it for the imageRunner line anymore? 5000 ? 5570 ? Im ready to obtain one from someone who cares to sell if I need it. 330's are dead...


      still needed on some series for options (Finishers/DADF's )out there
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • mark123
          Junior Member
          • Jul 2012
          • 2
          #3
          Re: Canon downloader PCB tool Do we need this for the imageRunner line anymore?

          Last time I used one was on a iR3300 finisher.

          It has since gone missing, so I won't be using it again.

            Comment

            • charm5496
              Service Manager

              Site Contributor
              1,000+ Posts
              • Apr 2008
              • 2387
              #4
              Re: Canon downloader PCB tool Do we need this for the imageRunner line anymore?

              crap I just used mine today on an IR-5020 that another tech upgraded causing a miscommunication with the finisher.
              Accidents don't just happen. They must be carelessly planned.

                Comment

                Previous template Next
                Working...