If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi I have a canon ir1023f that comes to ready then to initializing then to blank screen and just keeps repeating that sequence. The customer says thay just changed out toner. any sugestions thank you
Hi I have a canon ir1023f that comes to ready then to initializing then to blank screen and just keeps repeating that sequence. The customer says thay just changed out toner. any sugestions thank you
remove and re-seat the ROM PCB/
or remove ROM PCB/ see if printer comes to ready state
Check whether the toner cartridge is installed securely.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment