IWAM software installation in canon 3225 printer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • krish
    Technician
    • Apr 2010
    • 16
    #1

    [Misc] IWAM software installation in canon 3225 printer

    Hi all,

    I would like to know the procedure for installing canon iWAM for MEAP software in Canon iR 3225 printer. Actually the printer is from US and the software is from Canon India and customer is in India.

    Thanks in advance,

    krish
    Tags: ignore
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: IWAM software installation in canon 3225 printer

      Installing imageWARE Accounting Manager (iWAM)
      Question :
      How do you install imageWARE Accounting Manager (iWAM)? What are the required steps?

      Answer :
      * For more detailed instructions, please see the attached iWAM Users Guide.


      Summary of installation steps (for a new install): * IMPORTANT - The steps below must be performed in this EXACT ORDER.
      1. Install Microsoft Internet Information Services (IIS) (v5.0, v5.1, or v6.0).
      2. Install MSDE 2000 SP4 or SQL Server 7/2000 SP4 (restart after installation of SQL).
      3. Install Sun Java 2 Runtime Engine (J2RE) Standard Edition 1.4.2_10 or later (Java SE can also be downloaded from the Oracle Technology Network for Java Developers site).
      4. Install iWAM 5.0 Server (install iWAM Central Server onto the computer you want to use as the Central Server). Register your license via LMS.
      5. Setup your iWAM Server preferences settings.
      6. Install the iWAM Client Module on the computers that will be used for printing (ex. install it on the print server).
      7. Install the Billing Code Plug-in Client on any MEAP-enabled iR devices that may need to have it installed.
      8. If you have VCC (Virtual Cash Controller) devices or DA units, configure them now (if applicable).
      9. If Central Server is being used, register the iWAM location servers.

      Upgrade instructions for an existing NetSpot Accountant installation (NOT for Windows NT 4.0):
      * NOT APPLICABLE FOR WINDOWS NT 4.0.
      1. Install MSDE 2000 SP4 or MSSQL 7/2000 SP4 (restart after installation of SQL). If an older version is already installed, it will be overwritten.
      2. You can install iWAM 5.0 by overwriting the previous version of Accounting Manager/NetSpot Accountant The database information from NetSpot Accountant can be used with iWAM 5.0.
      3. Install Sun Java 2 Runtime Engine (J2RE) Standard Edition 1.4.2_10 or later (Java SE can also be downloaded from the Oracle Technology Network for Java Developers site).
      4. Install the new version of iWAM (iWAM Server 5.0).
      5. Setup your iWAM Server preferences settings.
      6. Uninstall the Client Module from all of the computers you use for printing (if NetSpot Accountant Client Module 3.0 or higher is installed, you do not have to uninstall it). After deleting the Client Module, make sure that you restart the computer.
      7. Install the Client Module into all of the computers you use for printing.
      8. Install the Billing Code Plug-in Client on any MEAP-enabled iR devices that may need to have it installed.
      9. If you have a VCC (Virtual Cash Controller) or DA units, configure them now if applicable.
      10. If Central Server is being used, register the iWAM location servers.

      Upgrade instructions for an existing NetSpot Accountant installation (Windows NT 4.0):
      iWAM 5.0 is not supported on Windows NT 4.0. To convert a version of NetSpot Accountant that was created in Windows NT 4.0 to Accounting Manager v5.0, you must change the OS and the database. For information on the conversion procedures, refer to 'Converting the Database from a NetSpot Accountant Created in Windows NT 4.0' on page 11-12 of the attached iWAM Users Guide.
      Attached Files
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • krish
          Technician
          • Apr 2010
          • 16
          #3
          Re: IWAM software installation in canon 3225 printer

          Mr. Teckat,

          Thank you very much for the detailed information and pdf. My question is "whether I need to do any setting/ registration of the software in the printer to enable the software"?

          Thanks and Regards,
          krish

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: IWAM software installation in canon 3225 printer

              Originally posted by krish
              Mr. Teckat,

              Thank you very much for the detailed information and pdf. My question is "whether I need to do any setting/ registration of the software in the printer to enable the software"?

              Thanks and Regards,
              krish
              --------------------------------------------------------------------------
              did u purchase the imageWARE Accounting Manager 5.0 Full Version ??
              it will have License included --Licensing will be accomplished via LMS (License Management System).
              u register online

              or do u have a 45 day trial version ??
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • krish
                  Technician
                  • Apr 2010
                  • 16
                  #5
                  Re: IWAM software installation in canon 3225 printer

                  Originally posted by teckat
                  Installing imageWARE Accounting Manager (iWAM)
                  Question :
                  How do you install imageWARE Accounting Manager (iWAM)? What are the required steps?

                  Answer :
                  * For more detailed instructions, please see the attached iWAM Users Guide.


                  Summary of installation steps (for a new install): * IMPORTANT - The steps below must be performed in this EXACT ORDER.
                  1. Install Microsoft Internet Information Services (IIS) (v5.0, v5.1, or v6.0).
                  2. Install MSDE 2000 SP4 or SQL Server 7/2000 SP4 (restart after installation of SQL).
                  3. Install Sun Java 2 Runtime Engine (J2RE) Standard Edition 1.4.2_10 or later (Java SE can also be downloaded from the Oracle Technology Network for Java Developers site).
                  4. Install iWAM 5.0 Server (install iWAM Central Server onto the computer you want to use as the Central Server). Register your license via LMS.
                  5. Setup your iWAM Server preferences settings.
                  6. Install the iWAM Client Module on the computers that will be used for printing (ex. install it on the print server).
                  7. Install the Billing Code Plug-in Client on any MEAP-enabled iR devices that may need to have it installed.
                  8. If you have VCC (Virtual Cash Controller) devices or DA units, configure them now (if applicable).
                  9. If Central Server is being used, register the iWAM location servers.

                  Upgrade instructions for an existing NetSpot Accountant installation (NOT for Windows NT 4.0):
                  * NOT APPLICABLE FOR WINDOWS NT 4.0.
                  1. Install MSDE 2000 SP4 or MSSQL 7/2000 SP4 (restart after installation of SQL). If an older version is already installed, it will be overwritten.
                  2. You can install iWAM 5.0 by overwriting the previous version of Accounting Manager/NetSpot Accountant The database information from NetSpot Accountant can be used with iWAM 5.0.
                  3. Install Sun Java 2 Runtime Engine (J2RE) Standard Edition 1.4.2_10 or later (Java SE can also be downloaded from the Oracle Technology Network for Java Developers site).
                  4. Install the new version of iWAM (iWAM Server 5.0).
                  5. Setup your iWAM Server preferences settings.
                  6. Uninstall the Client Module from all of the computers you use for printing (if NetSpot Accountant Client Module 3.0 or higher is installed, you do not have to uninstall it). After deleting the Client Module, make sure that you restart the computer.
                  7. Install the Client Module into all of the computers you use for printing.
                  8. Install the Billing Code Plug-in Client on any MEAP-enabled iR devices that may need to have it installed.
                  9. If you have a VCC (Virtual Cash Controller) or DA units, configure them now if applicable.
                  10. If Central Server is being used, register the iWAM location servers.

                  Upgrade instructions for an existing NetSpot Accountant installation (Windows NT 4.0):
                  iWAM 5.0 is not supported on Windows NT 4.0. To convert a version of NetSpot Accountant that was created in Windows NT 4.0 to Accounting Manager v5.0, you must change the OS and the database. For information on the conversion procedures, refer to 'Converting the Database from a NetSpot Accountant Created in Windows NT 4.0' on page 11-12 of the attached iWAM Users Guide.
                  Dear Mr. Teckat,

                  Thank you very much and please ignore earlier reply.

                  Thanks and Regards,

                  krish

                    Comment

                    Previous template Next
                    Working...