LBP5960 Error E062-0102

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • benerin
    Technician

    50+ Posts
    • Dec 2011
    • 59

    #1

    [Error Code] LBP5960 Error E062-0102

    Hello.

    I have a problem that i can not trace where is the real cause, somebody can help me to rectify this problem..I check in manual is not listed.

    Thanks inadvance

    Benerin
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: LBP5960 Error E062-0102

    Originally posted by benerin
    Hello.

    I have a problem that i can not trace where is the real cause, somebody can help me to rectify this problem..I check in manual is not listed.

    Thanks inadvance

    Benerin


    are u sure of that error E 062
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • benerin
      Technician

      50+ Posts
      • Dec 2011
      • 59

      #3
      Re: LBP5960 Error E062-0102

      Sorry sir, I'm mistake.. It's E067-0102..

      This problem is intermittent. I Check the connector or contact of ITB... but still the problem will show up time to time..

      Comment

      • northernlife
        Senior Tech

        500+ Posts
        • Sep 2011
        • 847

        #4
        Re: LBP5960 Error E062-0102

        Sounds like an HV e code for the magenta drum. How old are the drum units in your machine?

        Originally posted by benerin
        Sorry sir, I'm mistake.. It's E067-0102..

        This problem is intermittent. I Check the connector or contact of ITB... but still the problem will show up time to time..

        Comment

        • benerin
          Technician

          50+ Posts
          • Dec 2011
          • 59

          #5
          Re: LBP5960 Error E062-0102

          Hello..

          Its almost 2 months sir, customer change regularly because their printing volume its a little high..

          As of now sir, no problem reportedly to me.. last time I went thier (last week ago) I fix the ITB connectors...

          I Hope everythings okey on that machine..

          Thanks a lot in your reply..

          Comment

          Working...