IR2318L it just acts like it's processing the job but then prints nothing...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rakesh
    Service Manager

    50+ Posts
    • May 2012
    • 72
    #1

    [Misc] IR2318L it just acts like it's processing the job but then prints nothing...

    one of our client have a Canon iR2318L.... from last 2 days there is a problem in printing. sometime printing comes OK... but sometimes it just acts like it's processing the job but then prints nothing. (yellow LED on). user data list (self test) comes OK. .....I executed a Clear all with a latest firmware upgrade, checked IP & DNS setting from both end, tested TCP/IP connectivity by using the ping command, (found OK), re-installed new canon iR UFRII drivers ver 20.85, checked printer on different PC, checked from laptop directly connecting to printer, changed LAN adapter of printer. changed Patch cord, checked & refitted all connectors of IP Board & Dc controller, but still problem is not solved.

    Anyone ever have a similar issue?

    Need Some Expert Advice Please...






    View Life As A Continuous Learning Experience...
    View Life As A Continuous Learning Experience...
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: IR2318L it just acts like it's processing the job but then prints nothing...

      memory

      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Rakesh
          Service Manager

          50+ Posts
          • May 2012
          • 72
          #3
          Re: IR2318L it just acts like it's processing the job but then prints nothing...

          Update - This issue has now been resolved by changing DC Controller PCB.
          View Life As A Continuous Learning Experience...

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: IR2318L it just acts like it's processing the job but then prints nothing...

              Originally posted by Rakesh
              Update - This issue has now been resolved by changing DC Controller PCB.
              hope u put back u'r DCON settings
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • Rakesh
                  Service Manager

                  50+ Posts
                  • May 2012
                  • 72
                  #5
                  Re: IR2318L it just acts like it's processing the job but then prints nothing...

                  + =
                  View Life As A Continuous Learning Experience...

                    Comment

                    Previous template Next
                    Working...