[Error Code] ir5075n

[Apach]

Yesterday during the printing plate is stopped and showed an error E00100-0001 . Today after ignition showed an error E00061-0001. According to the error code table, and experience shows that the error should be replaced laser unit. Before the laser unit to order it if anyone has any further information? Thanks


P.S.

After execute in service mode COPIER> FUNCTION>
DPC> DPC from 1 to 0 device started normaly but after first page return E00061-0001

[canonbundy]

Re: ir5075n

Yesterday during the printing plate is stopped and showed an error E00100-0001 . Today after ignition showed an error E00061-0001. According to the error code table, and experience shows that the error should be replaced laser unit. Before the laser unit to order it if anyone has any further information? Thanks


P.S.

After execute in service mode COPIER> FUNCTION>
DPC> DPC from 1 to 0 device started normaly but after first page return E00061-0001

Check previous POSTS for E100, it will be a broken Screw Lug on the Fan Cover above the T/S assy - the cover pushes the Laser Shutter open also return DPC back to original - don't fiddle around with settings in these Boxes........you WILL come unstuck.