canon imagepass H1

[browny]

Hello everyone .
Canon IRC 5185 with Imagepass H1 : I just replaced HD of imagepass H1 with software in it .but the IP address is default address : DO YOU KNOW THE PROCEDURE TO CHANGE IP ADDRESS ? I have service guide (imagepass H! color network printer) & imagepass H1 installation procedure :but not clear how to do it .... please help ...Thank you.

[teckat]

Re: canon imagepass H1

Hello everyone .
Canon IRC 5185 with Imagepass H1 : I just replaced HD of imagepass H1 with software in it .but the IP address is default address : DO YOU KNOW THE PROCEDURE TO CHANGE IP ADDRESS ? I have service guide (imagepass H! color network printer) & imagepass H1 installation procedure :but not clear how to do it .... please help ...Thank you.

Before Starting the Work & making any cable connections
go into Printer 5185 Service Mode--

-press Additional Functions Key (once)
press #2 & 8 key at the same time (release both)
then press Additional Functions Key again (release it)

go into
COPIER>OPTION>INTFACE> IMG-CONT and set this to '3'
power off/on printer-----
This way, the appropriate IP address will automatically be setup for communication
between the machine and its host machine.

now make all connectionsu should see the PRINTER TAB on control panel > if not use the scroll arrow top right corner to bring up window--

-At the Control Panel, press [Printer]tab.
-Press [Printer Status/Settings].
-At the Languages Setup screen, select the name of the language you want to use, and then select OK.
-When setting it up, the password input screen is displayed.
-When the following password is input, Fiery.1 you can enter a setup screen.now u will see the RUN SETUP Screen

enter all your information here