ir6570 suspended

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mr.daus
    Technician
    • Apr 2011
    • 98

    #1

    ir6570 suspended

    hi all,I have problems with the machine canon ir 6570, when worn copy appears suspended and not working normally, I finally replace the mainboard.
    but i want to know what happened to the mainboard that's broken?
    thanks
    firdaus +(62)8195002007 firdaustrish@ymail.com
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: ir6570 suspended

    Originally posted by mr.daus
    hi all,I have problems with the machine canon ir 6570, when worn copy appears suspended and not working normally, I finally replace the mainboard.
    but i want to know what happened to the mainboard that's broken?
    thanks
    --------------------------------

    why would u change a Main pcb because of "Suspended" message

    what did u check in the before process of replacing Main pcb.


    only a board bench tech > with proper instruments can pinpoint an issue with a bad PCB.

    Many>Many>Many years ago we used to be able to trace down certain components (transistors,capacitors etc.) because of cost and repair time in field> that was helped by good circuit diagrams ( component identity no longer supplied in manuals) u carried these common components with you.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • mr.daus
      Technician
      • Apr 2011
      • 98

      #3
      Re: ir6570 suspended

      Originally posted by teckat
      --------------------------------

      why would u change a Main pcb because of "Suspended" message

      what did u check in the before process of replacing Main pcb.


      only a board bench tech > with proper instruments can pinpoint an issue with a bad PCB.

      Many>Many>Many years ago we used to be able to trace down certain components (transistors,capacitors etc.) because of cost and repair time in field> that was helped by good circuit diagrams ( component identity no longer supplied in manuals) u carried these common components with you.
      I also never thought I'd get to replace the mainboard PCB unit, I just want to be sure why the engine is not running normally, whereas once I replace the mainboard engine to normal without changing any other part.
      firdaus +(62)8195002007 firdaustrish@ymail.com

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: ir6570 suspended

        Originally posted by mr.daus
        I also never thought I'd get to replace the mainboard PCB unit, I just want to be sure why the engine is not running normally, whereas once I replace the mainboard engine to normal without changing any other part.

        have u see this--Points to Note when Replacing the Main Controller

        Points to Note when Replacing the Main Controller.pdf



        may have been loose connection somewhere /
        Last edited by teckat; 03-25-2013, 03:26 PM.
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        Working...