Re: Problem copy from ADF canon ir3300
Sir, I can't see the options as you shown in the video. I like to know how to obtain the options. Like A4, A3, etc.
My machine not showing the paper options, there. thanks,
Udayan
-
Re: Problem copy from ADF canon ir3300
Dear member,
I have problem with my canon ir 3300 while coping from ADF, paper options are not coming in the feeder settings, how to obtain that. Can any one guide me.
UdayanLeave a comment:
-
Re: Problem copy from ADF canon ir3300
U1: FOOLSCAP-- is your paper tray set for U1
COPIER>OPTION>BODY>SCANSLCT - set to "0"When enabled, the scan size is determined in relation to the original
size.
Settings = 0: off (default), 1: on
COPIER>OPTION>BODY>SENS-CNF-set to "0"
Use it to set the arrangement of the original sensors.
Settings = 0: AB-configuration (default, 1: Inch-configuration, 2: A-configuration)
Caution- If you have changed the arrangement of the original sensors, select the appropriate
setting to suit the new arrangement.
COPIER>OPTION>USER>MF-LG-ST-set to "1"
Use it to indicate the Extra Length key for paper up to 630 mm long
(multifeeder, free; the ADF will also accommodate paper up to 630 mm
long).
Settings = 0: normal mode (default), 1: extra length mode (key indicated)Leave a comment:
-
-
Problem copy from ADF canon ir3300
Dear all,
I have problem with my canon ir3300, if copy in plate glass it's good,
But, when i copy from ADF, the margin different with original, it's different about 3 cm then original.
Notes: i use paper 215x330 cm.
Thx for your help.
Leave a comment: