inner finisher B1

[montana]

hi everybody....i am facing aproblem with installing the inner finisher B1 ....after i inatalled the finisher and turn on the machine the machine starts ok but the finisher does not start....and no response at all..it does not move..i mean totally dead...i replaced the finisher power supply but it is still the same
no error messages or error code the machine copying and the copy jammed in the finisher area...is there any ideas like setting or programming
thanks

[Tricky]

Re: inner finisher B1

The machine has got a two way unit B1 fitted?

Depending on whether the machine has a two way unit as standard there are sometimes three wires from the machine that plug into the power supply, not two as indicated in the instructions. Remove the power supply and have a close look for another power type wire.

[montana]

Re: inner finisher B1

The machine has got a two way unit B1 fitted?

Depending on whether the machine has a two way unit as standard there are sometimes three wires from the machine that plug into the power supply, not two as indicated in the instructions. Remove the power supply and have a close look for another power type wire.

thanks for reply mr skynet.....i will check it out

[teckat]

Re: inner finisher B1

hi everybody....i am facing aproblem with installing the inner finisher B1 ....after i inatalled the finisher and turn on the machine the machine starts ok but the finisher does not start....and no response at all..it does not move..i mean totally dead...i replaced the finisher power supply but it is still the same
no error messages or error code the machine copying and the copy jammed in the finisher area...is there any ideas like setting or programming
thanks

----------------------------------

on what model Printer ?

[montana]

Re: inner finisher B1

----------------------------------

on what model Printer ?

hi....on canon imagerunner 2520....thanks

[montana]

Re: inner finisher B1

hello...i checked the power supply but i wonder how could i know the missed wire connection could you specify it mr skynet?
thanks............i apreciate your help

[teckat]

Re: inner finisher B1

hello...i checked the power supply but i wonder how could i know the missed wire connection could you specify it mr skynet?
thanks............i apreciate your help

did u check the harness connections ????
FINISHER.JPG


also check the connections on Finisher Controller PCB

did u check for 24VS between internal Power Supply Unit-U1 and Finisher ????---------CLICK ON PIC>BETTER VIEW

POWER.JPG

[Jamesu]

Re: inner finisher B1

Sorry to hi-jack a thread but i'm also having a problem with finisher B1

Works fine and staples, but when double sided is asked of it it will jam in the 2 way unit B1. (Reversal pass option)

Thanks.

[teckat]

Re: inner finisher B1

Sorry to hi-jack a thread but i'm also having a problem with finisher B1

Works fine and staples, but when double sided is asked of it it will jam in the 2 way unit B1. (Reversal pass option)

Thanks.

--------------------------

JAM CODES ??

[montana]

Re: inner finisher B1

did u check the harness connections ????
[ATTACH=CONFIG]20414[/ATTACH]


also check the connections on Finisher Controller PCB

did u check for 24VS between internal Power Supply Unit-U1 and Finisher ????---------CLICK ON PIC>BETTER VIEW

[ATTACH=CONFIG]20415[/ATTACH]

hi..thank you mr tekcat for the pics that you sent...but there is a missed part on the second pic...could you please send it full....thanks again

[teckat]

Re: inner finisher B1

PS2.JPG
PS.JPG

CLICK ON PICS> better view

[cyberhiway]

Re: inner finisher B1

Hi all friends , anybody have inner finisher B1 service manual and catalog ?

[Canuck]

Re: inner finisher B1

Go into service mode....is machine seeing finisher? Is there a SORTER tab on initial service mode screen?