MF 6550

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zaza
    MECANOGRAPHE

    1,000+ Posts
    • Mar 2008
    • 1095

    #1

    [Misc] MF 6550

    Hello all technician ...we have canon mf6550 displayed this message ...DOWNLOAD STANDBY .. please l need your assistance ....
    BEST TECHNICIAN . NICE PEOPLE .
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: MF 6550

    Originally posted by zaza
    Hello all technician ...we have canon mf6550 displayed this message ...DOWNLOAD STANDBY .. please l need your assistance ....


    reload the system software and the error will go away.


    Turn off the machine. Unplug it. Unplug the phone line from the back. Now press the on/off rocker switch on the side 5 times. Next push the round on/off button on top 5x. Then push the "stop" button 5x. Finally, push the "start" button 5x. Then wait a few minutes. Next connect the power cord only. Then turn on with the rocker button.

    If the message didn't come up, your lucky!
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • zaza
      MECANOGRAPHE

      1,000+ Posts
      • Mar 2008
      • 1095

      #3
      Re: MF 6550

      very well but if this error regard use a frimware ....it is probability ?
      BEST TECHNICIAN . NICE PEOPLE .

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: MF 6550

        Originally posted by zaza
        very well but if this error regard use a frimware ....it is probability ?


        zaza has exceeded their stored private messages quota and cannot accept further messages until they clear some space.


        your PM is full/ delete old

        i have never seen firmware for 6550
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • zaza
          MECANOGRAPHE

          1,000+ Posts
          • Mar 2008
          • 1095

          #5
          Re: MF 6550

          Originally posted by teckat
          zaza has exceeded their stored private messages quota and cannot accept further messages until they clear some space.


          your PM is full/ delete old

          i have never seen firmware for 6550
          ok friend l will empty some old message ...in your opinion you means it is not important to use a frimware to solve my problems ?
          BEST TECHNICIAN . NICE PEOPLE .

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083

            #6
            Re: MF 6550

            Originally posted by zaza
            ok friend l will empty some old message ...in your opinion you means it is not important to use a frimware to solve my problems ?
            -----------------

            i do not know where u could find firmware for this model/

            is printer still down
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • zaza
              MECANOGRAPHE

              1,000+ Posts
              • Mar 2008
              • 1095

              #7
              Re: MF 6550

              by way l try your solution to solve my problems ..ok thanks .
              BEST TECHNICIAN . NICE PEOPLE .

              Comment

              • teckat
                Field Supervisor

                Site Contributor
                10,000+ Posts
                • Jan 2010
                • 16083

                #8
                Re: MF 6550

                Originally posted by zaza
                by way l try your solution to solve my problems ..ok thanks .


                did it work ????????????
                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • zaza
                  MECANOGRAPHE

                  1,000+ Posts
                  • Mar 2008
                  • 1095

                  #9
                  Re: MF 6550

                  Originally posted by teckat
                  did it work ????????????
                  not yet cause the time is very late l should be trying tomorrow ...unfortunate l try search her sm or her frimware but never found it ..only to assisted solve my problems ....by way thank friend teckat about your assistance.
                  BEST TECHNICIAN . NICE PEOPLE .

                  Comment

                  • Canon.Tech
                    Trusted Tech
                    • Mar 2009
                    • 335

                    #10
                    Re: MF 6550

                    I'll see if I have the firmware for this model. I have sent you the service manual (hopefully you have cleared your inbox!)

                    Comment

                    • zaza
                      MECANOGRAPHE

                      1,000+ Posts
                      • Mar 2008
                      • 1095

                      #11
                      Re: MF 6550

                      hello again ...always l search a frimware for this mf 6550 cause l trying more to solve this problems but unfortunate any idea so can anyone help me .
                      BEST TECHNICIAN . NICE PEOPLE .

                      Comment

                      • HP:guy
                        Trusted Tech

                        250+ Posts
                        • Feb 2013
                        • 279

                        #12
                        Re: MF 6550

                        Canon U.S.A. : Support & Drivers : imageCLASS MF6550

                        Comment

                        • Canon.Tech
                          Trusted Tech
                          • Mar 2009
                          • 335

                          #13
                          Re: MF 6550

                          He's after firmware not drivers, that site says there are no firware available

                          Comment

                          • teckat
                            Field Supervisor

                            Site Contributor
                            10,000+ Posts
                            • Jan 2010
                            • 16083

                            #14
                            Re: MF 6550

                            Originally posted by canon.tech
                            he's after firmware not drivers, that site says there are no firware available



                            no firmware = time to DUMP

                            Shovel crap.jpg
                            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            • zaza
                              MECANOGRAPHE

                              1,000+ Posts
                              • Mar 2008
                              • 1095

                              #15
                              Re: MF 6550

                              Originally posted by Canon.Tech
                              He's after firmware not drivers, that site says there are no firware available
                              please friend canon.tech ..l wait your premise to search me this frimware if you find it sent me there .surly by private
                              BEST TECHNICIAN . NICE PEOPLE .

                              Comment

                              Working...