Canon IRC3200N cleaning/quality problems!!!

[tinnyjay]

Hello!
Canon IRC3200 is showing a cleaning issue and i cannot find the problem.
I changed ITB cleaning blade and transfer roller,cleaned carefully ITB,salt sensor but still the same.
I am uploading an image to understand well what happens if i print/copy a page(in this case white page):
2 001.jpg

[Ron314]

Re: Canon IRC3200N cleaning/quality problems!!!

I can't quite see which way the paper is traveling on your picture but if the lead edge is on the right of the image that you posted then it appears that the problem is in the mounting of your transfer sheet cleaning blade assembly, but I'm sure that you've checked it already. I'd pull the transfer belt assembly right out of the copier (1 screw through the right hand side) and clean the overall exposure array that is just on the right as well as check to see what is really going on with that thing. a four-color streak seems to indicate the first suggestion but ? Hope this helps.




314159265

[Fer]

Re: Canon IRC3200N cleaning/quality problems!!!

You changed the cleaning blade right? Still not cleaning the itb. I believe that your ITB not properly aligned inside the machine. Remove the ITB and check inside the machine if the 2 hooks that carry the ITB at the cleaning blade side are ok.

One hook is mounted in the front, one in the back. Both connected to a rod, which is connected to a blue handle in front of the machine. The handle you pull down to remove the waste toner bottle.

Sorry, i have no pictures.

[tinnyjay]

Re: Canon IRC3200N cleaning/quality problems!!!

Solved!(bad itb cleaning blade mechanism)
Thank you so much

[Fer]

Re: Canon IRC3200N cleaning/quality problems!!!

What mechanism?

U just show it in right?