IR2270 image shift on flatbed when copying

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SMHtech
    Technician
    • Apr 2013
    • 15
    #1

    IR2270 image shift on flatbed when copying

    It just so happens that i have another canon here that when making copies, the image is loosing the top .5-.75". im not sure if this is the scanner, or the reg. assy? i had entered the service mode and played with the settings on the ADJ XY setting i beleive, but it didnt do much. Is there any kind of facory reset/default reset of these settings incase the end user had gone in and played around? thanks
    ~Randy
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: IR2270 image shift on flatbed when copying

      Originally posted by SMHtech
      It just so happens that i have another canon here that when making copies, the image is loosing the top .5-.75". im not sure if this is the scanner, or the reg. assy? i had entered the service mode and played with the settings on the ADJ XY setting i beleive, but it didnt do much. Is there any kind of facory reset/default reset of these settings incase the end user had gone in and played around? thanks
      ~Randy
      ==============================

      Check door specifications
      Replace registration clutch
      Worn paper feed/separation rollers


      Adjusting the Leading Edge Non-Image Width can be completed by the following adjustment:
      Enter service mode to make adjustment in COPIER > ADJUST > ADJ-XY > ADJ-X.
      Decreasing the adjustment by 10 will decrease the non-image width by 1 mm.
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • SMHtech
          Technician
          • Apr 2013
          • 15
          #3
          Re: IR2270 image shift on flatbed when copying

          Would anyone happen to have the above mentioned part numbers? I am new to canon, but have been a tech for printers and plotters for eight years now, this is just a new animal to me and any help would be much appreciated. thank you

          Also, how would i go about seeing what jam errors are present in the memory? thanks again.
          ~Randy

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: IR2270 image shift on flatbed when copying

              Originally posted by SMHtech
              Would anyone happen to have the above mentioned part numbers? I am new to canon, but have been a tech for printers and plotters for eight years now, this is just a new animal to me and any help would be much appreciated. thank you

              Also, how would i go about seeing what jam errors are present in the memory? thanks again.
              ~Randy
              ------------------
              1- get a service manual
              2- u need to go into service mode for codes
              3- Enter the Service Mode. (Press "*" asterisk key first>release>, then #"2"
              and #"8" key at the same time>release>, and then "*"asterisk key )

              see view--
              screen.JPG


              screen2.JPG
              Jam Cover (printer unit)
              Code /Jam
              01xx /delay jam
              02xx /stationary jam
              0Axx /residual jam

              xx01 /cassette 1 tray sensor PS10
              xx02 /cassette 2 retry sensor PS11
              xx03 /cassette 3 retry sensor PS1 (cassette pedestall)
              xx04 /cassette 4 retry sensor PS2 (cassette pedestall)
              xx05 /registration sensor PS9
              xx06 /--- ---
              xx07 /fixing delivery sensor PS13
              xx08 /No. 1 delivery sensor PS14
              xx09 /No. 2 delivery sensor PS1A (2/3 delivery unit)
              xx0A /reversal sensor PS4A (2/3 delivery unit)
              xx0B /No. 3 delivery sensor PS5A (2/3 delivery unit)
              xx0C /duplexing assembly feed sensor PS3A (2/3 delivery unit)
              xx0D /duplex/feed sensor PS17
              xx0E /deck retry sensor PS6D (side paper deck)
              xx0F /deck pull-off sensor PS1D (side paper deck)
              xx11 /buffer inlet sensor PS1B (buffer path unit)
              xx12 /buffer outlet sensor PS2B (buffer path unit)
              ================================================== =============
              Jam Code (finisher-related)
              1001 inlet path sensor feed delay jam PI3
              1002 punch path sensor (punch registration
              sensor) feed delay jam
              LED5/PTR5
              1004 delay path sensor feed delay jam PI4
              1101 inlet path sensor feed stationary jam PI3
              1102 punch path sensor (punch registration
              sensor) feed stationary jam
              LED5/PTR5
              1104 delivery path sensor feed stationary jam PI4
              1200 timing jam PI3
              1500 stapler jam STP
              1300 power-on jam PI3,PI4
              1400 door open jam DOOR
              1644 punch jam LED5/PTR5
              1645 punch power-on jam LED5/PTR5
              1791 saddle feed sensor feed delay jam PI8S,PI19S,PI20S
              1792 saddle delivery sensor feed delay jam PI11S
              1793 saddle inlet sensor feed delay jam PI22S
              17A1 saddle feed sensor feed stationary jam P18S,PI19S,PI20S
              17A2 saddle delivery sensor feed stationary jam PI11S,PI17S
              17A3 saddle inlet sensor feed stationary jam PI22S
              1786 saddle staple jam S STP
              1787 saddle power-on jam PI11S,PI18S,PI19S,PI20S,PI22S
              1788 saddle door open jam DOOR
              1011 inlet path sensor feed delay jam PI5
              1121 inlet path sensor feed stationary jam PI5
              1F81 stack delivery jam PI1
              1506 staple jam STP
              1307 power-on jam POWER ON
              1408 door open jam (joint) DOOR
              1644 punch hole jam SR2
              1347 punch power-on jam LED7/PTR7
              ================================================== =======================
              Jam Code (ADF-related)
              0003 registration sensor delay
              0004 registration sensor
              0005 read sensor delay
              0006 read sensor stationary
              0007 delivery sensor delay
              0008 delivery sensor stationary
              0044 1st sheet registration sensor stationary
              0045 1st sheet read sensor delay
              0046 1st sheet read sensor stationary
              0047 1st sheet delivery sensor delay
              0048 1st sheet delivery sensor stationary
              0071 timing error
              0090 ADF open reader unit sensor
              0091 user ADF open reader unit sensor
              0092 ADF cover open
              0093 user cover open
              0094 initial stationary
              0095 pickup fault
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • SMHtech
                  Technician
                  • Apr 2013
                  • 15
                  #5
                  Re: IR2270 image shift on flatbed when copying

                  Awesome, thankyou very much.
                  ~Randy

                    Comment

                    Previous template Next
                    Working...