E004-0201, E004-0501 on IR C5185

[adeyemi]

Can anyone kindly help out with some solution for E004-0201 and E004-0501 repeatedly on IR C5185.

[zoraldinho]

Re: E004-0201, E004-0501 on IR C5185

How many prints have fixing assy?

[herlin]

Re: E004-0201, E004-0501 on IR C5185

What have you done already?

[teckat]

Re: E004-0201, E004-0501 on IR C5185

Can anyone kindly help out with some solution for E004-0201 and E004-0501 repeatedly on IR C5185.

====================


U NEED TO REPLACE THE UNIT --------------are u a tech

E004 indicates a fixing unit protection circuit trouble.

[Rachid.Akli]

Re: E004-0201, E004-0501 on IR C5185

Dear all,

Replace the fixing unit and do the appropriate adjustments.

Be sure to execute the following operations in service mode.

-Clear the fixing delivery counter:
COPIER > COUNTER > DRBL-1 > FX-BLT-U

-Execute the fixing belt and pressure belt HP search operation:
COPIER > FUNCTION > FIXING > FX-UHP-S
COPIER > FUNCTION > FIXING > FX-LHP-S

Rachid.

[adeyemi]

Re: E004-0201, E004-0501 on IR C5185

How many prints have fixing assy?

New machine, less than 20K prints!

[adeyemi]

Re: E004-0201, E004-0501 on IR C5185

What have you done already?

Tested with another fuser and it worked. I want to know how to repair the faulty one, 'cause its still quite new less than 20K prints

[teckat]

Re: E004-0201, E004-0501 on IR C5185

Tested with another fuser and it worked. I want to know how to repair the faulty one, 'cause its still quite new less than 20K prints

--------------------------------------

READ PDF---------TP09 205d.pdf


did u try to do below for E004 in service mode
COPIER>FUNCTION >CLEAR>ERR



5185's are not new printers/ they came out in 2007/

20K means nothing is FULL COLOR was run at more than 6% coverage


swapped FIX UNITS will probably pop an E007 Error down the road if u did not do the above posted adjustment

REPAIR what ?? Temperature issue ?
u would first need to disassemble to inspect> GEARS & CONNECTORS>
U CAN NOT INSPECT INTERIOR THERMOSTAT INSIDE BELT

Did u First check that the Fixing Door has not popped open and closes and locks properly (a typical problem that usually
goes unnoticed) and retry.

[adeyemi]

Re: E004-0201, E004-0501 on IR C5185

Thanks friend. What i mean is that this particular machine is relatively new, haven done just about 20,000 prints. I also said that when i put another fixing unit, the machine worked perfectly. Meaning the problem is right inside the fixing unit. That is why i'm wondering what is damaged inside it and if it can be fixed. And thanks for the attachment, i 'll study closely and see what i can get from it. Thanks