IR 7086 PM Counts....?

[Mita-Konica-Tech]

I do not normally work on Cannons nor have i had a chance to get a manual on this model, IR 7086 yet.

Couple of quick questions on the pm cycles on this model:

Maintenance Cycle (PM Count)...?

Drum Life:...?

Developer/Clean blade life:...?

Thanks in advance....

[zoraldinho]

Re: IR 7086 PM Counts....?

You can check the timing of replacement in service mode:

COPIER > COUNTER > PRDC-1

Capture.JPG

You can check the timing of replacement in service mode:

- Main Machine
COPIER > COUNTER > DRBL-1
- Accessory
COPIER > COUNTER > DRBL-2

Capture.JPG



Capture.JPG

[Mita-Konica-Tech]

Re: IR 7086 PM Counts....?

zoraldinho......Thanks for the info..... I just took on this Cannon account and need to bring their machines up to factory spec.... I'm normally work on Konica and Kyocera (99.9 % of the time) but just picked up this new client who has four of these units.... Just getting up to speed on Cannon.....

Their previous dealer/tech went out of business and they are located in a rural area in the state and are desperate for a tech to service them.... The nearest Cannon dealer (60 miles away) wont bother to help them out with service......

Again thanks....

[zoraldinho]

Re: IR 7086 PM Counts....?

Any time.No problem.