Canon IRC5030

[mramlawi]

Dear all ,

I have canon IRC5030 gives error E000027-400 ? can any one tell me what is i debut in power supply
cos i have three copiers IR8500 also gives Error 00068-000 the four copiers at the same time gives errors !! so i guess its electricity problem .


thanks

[Tricky]

Re: Canon IRC5030

IRC5030 Error code:

E027 0400 05 Title Error in supply with Bk Developing Assembly
Description Failure in detection about the changes of ON => OFF =>
ON with the sensor which detects a full rotation of the supply
screw within the specified period of time.
Remedy 1. Check the damage of the Developing Coupling
See pdf

[teckat]

Re: Canon IRC5030

Dear all ,

I have canon IRC5030 gives error E000027-400 ? can any one tell me what is i debut in power supply
cos i have three copiers IR8500 also gives Error 00068-000 the four copiers at the same time gives errors !! so i guess its electricity problem .


thanks

\\\\\\\\\\\\\\\\


iR8500
E068 error code is a fault (leakage) in the high-voltage output to the separation charging assembly.
Usually from poor maintenance on printer


time for u to buy service manuals for your printers


CHECK ALL corona wires & unit assembly's

inspect or replace the HV support block plate===FB4-3848-000

[mramlawi]

Re: Canon IRC5030

\\\\\\\\\\\\\\\\


iR8500
E068 error code is a fault (leakage) in the high-voltage output to the separation charging assembly.
Usually from poor maintenance on printer


time for u to buy service manuals for your printers


CHECK ALL corona wires & unit assembly's

inspect or replace the HV support block plate===FB4-3848-000

thanks for all i have the manuas bro,but i was on the street and i dont have time to check my laptop bro :/