If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
[Error Code]
Canon IR 3235 Fuser film sliding one side
I erroneously adjusted the fuser film pressure springs on ir 3235 and now when i fit the fuser film its moving on one side tearing the film during the process. Can anyone tell me how to adjust the pressure to keep it level. Thanks guys
I erroneously adjusted the fuser film pressure springs on ir 3235 and now when i fit the fuser film its moving on one side tearing the film during the process. Can anyone tell me how to adjust the pressure to keep it level. Thanks guys
Fixing Nip Pressure
Comment