Canon IPF8300

[mramlawi]

Dear all ,

actually i have a wired problem at my client ,the IPF8300 cant print , when i gave it order its gives printing on the screen but nothing happen , i tried to make a test print from the machine also same issue ,the carragie move a lil then stops without giving any error ,so i asked my friend which hes expert in this models he told me looks like the Carriage Board problem or one of the heads but first try to replace the board , so i replaced it and then i tried to print, the machine gave me error 03300031-4027 i read the service manual they wrote its a carriage not moving well ,i cleaned the shaft and everything also i turn back the old board
same error code ,can any one tell me what must i do ? i wonder if i made somthing wrong but im sure m not .



thanks

[teckat]

Re: Canon IPF8300

Dear all ,

actually i have a wired problem at my client ,the IPF8300 cant print , when i gave it order its gives printing on the screen but nothing happen , i tried to make a test print from the machine also same issue ,the carragie move a lil then stops without giving any error ,so i asked my friend which hes expert in this models he told me looks like the Carriage Board problem or one of the heads but first try to replace the board , so i replaced it and then i tried to print, the machine gave me error 03300031-4027 i read the service manual they wrote its a carriage not moving well ,i cleaned the shaft and everything also i turn back the old board
same error code ,can any one tell me what must i do ? i wonder if i made somthing wrong but im sure m not .



thanks

-----------


replace Linear Scale
Linear Scale QC3-1877-000


Canon is now adding a protective mylar to the Linear Scale parts supply. error codes may appear intermittently.
The scale is blurred with this mylar attached, causing Linear Encoder to falsely read it. Please remove it prior to installing a new scale and/or check to see if one is mounted on the existing printer.

[mramlawi]

Re: Canon IPF8300

-----------


replace Linear Scale
Linear Scale QC3-1877-000


Canon is now adding a protective mylar to the Linear Scale parts supply. error codes may appear intermittently.
The scale is blurred with this mylar attached, causing Linear Encoder to falsely read it. Please remove it prior to installing a new scale and/or check to see if one is mounted on the existing printer.

aha so it looks from it !!! but what i wonder it wasnt maybe when i disassemble it donno :/

thanks Teckat

[teckat]

Re: Canon IPF8300

aha so it looks from it !!! but what i wonder it wasnt maybe when i disassemble it donno :/

thanks Teckat

Check Mark.jpg

[mramlawi]

Re: Canon IPF8300

[ATTACH=CONFIG]20900[/ATTACH]

thanks teckat it was the flat cable that connected to the Carraige Board it was not good thanks