[Error Code] E100-001

[Reeves]

i have a ir 3035 copier which is giving me err E100-001 i have charged the reg clutch but still the code keeps on coming please advice

[zoraldinho]

Re: E100-001

This is Laser unit issue.Inspect laser and connectors or replace unit

[Mina Banoub]

Re: E100-001

i have a ir 3035 copier which is giving me err E100-001 i have charged the reg clutch but still the code keeps on coming please advice

chech the wire that open/close the laser shutter (it is connected to a lever that is controled by the right side door )

[Reeves]

Re: E100-001

I have charged the laser unit the error code still is coming just after it picks the paper then it jams with E100-001

[Reeves]

Re: E100-001

chech the wire that open/close the laser shutter (it is connected to a lever that is controled by the right side door )

yes i have checked it its okey

[Luther]

Re: E100-001

yes i have checked it its okey

Check the ground on the registration roller, open the right door and on the front side of the registration roller is a silver ground strap, remove and clean the ground and the roller where it contacts the roller