IR 3035 paper jam

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bineeshgeorge
    Trusted Tech

    100+ Posts
    • Jul 2009
    • 107

    #1

    IR 3035 paper jam

    Hai friends,


    One of my ir3035 shows paper jam continuous from stack bypass only. There is no problem from both treys.



    Jam code 0107.

    Please help me..........
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: IR 3035 paper jam

    Originally posted by bineeshgeorge
    Hai friends,


    One of my ir3035 shows paper jam continuous from stack bypass only. There is no problem from both treys.



    Jam code 0107.

    Please help me..........


    ===================================
    is bypass set up as "Free Size"
    did u check Registration sensor and Actuator

    is this on all paper sizes ?
    copies only or on prints & copies ?
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • bineeshgeorge
      Trusted Tech

      100+ Posts
      • Jul 2009
      • 107

      #3
      Re: IR 3035 paper jam

      Originally posted by teckat
      ===================================
      is bypass set up as "Free Size"
      did u check Registration sensor and Actuator

      is this on all paper sizes ?
      copies only or on prints & copies ?

      Registration sensor and actuator is correct. No problem from trays........From bypass all type ( freesize A4,LGL,A4R,A3) of papers have the problem.

      Comment

      • Simons
        Trusted Tech
        • Jun 2008
        • 490

        #4
        Re: IR 3035 paper jam

        I know this is backwards but

        problem :

        When the side paper deck Q-1 was unplugged, 0107 jams occurred from upper or lower cassettes every 10-200 copies. When the side paper deck Q-1 was plugged in, we would get 0107 jams out of upper or lower cassettes every 17-50 and side paper deck every 7 copies. From manual feed there were no jams.
        Technician replaced right side door, put an extra spring wrap on pre-registration sensor flag. Also replaced cassette 1 feed unit. Cleared the DC controller PCB. Completed settings from TP06 047A and TP06 118. Replaced registration clutch. If Technician changed COPIER>ADJUST> FEED-ADJ> LOOP-CST to 127 or maximum, both the cassettes and side paper deck would feed over 300 each without a Jam. None of these actions resolved the issue.

        Solution :
        Replacing the registration sensor PS9 (WG8-5783-000) corrected the issue.

        Problem :
        An intermittent delay jam code of 0107 and a stationary jam code of 0201 are occurring.


        Solution :
        The problem was resolved, after focusing on the Registration Clutch. The support plate pin for the registration clutch had snapped off. The clutch plate is located behind the Main drive assembly of the machine.

        The item is shown on E-support, parts look up as item 300. The part number is FC5-7181-000.

        Comment

        • Tonersniffer
          Technician

          50+ Posts
          • Nov 2012
          • 74

          #5
          Re: IR 3035 paper jam

          Did you find a fix for this?

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083

            #6
            Re: IR 3035 paper jam

            Originally posted by Tonersniffer
            Did you find a fix for this?
            Read the Solution posted ;}~)
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • Tonersniffer
              Technician

              50+ Posts
              • Nov 2012
              • 74

              #7
              Re: IR 3035 paper jam

              Originally posted by teckat
              Read the Solution posted ;}~)
              Isnt the orginator of this post bineeshgeorge?

              are you a moderator Teckat?

              Comment

              • teckat
                Field Supervisor

                Site Contributor
                10,000+ Posts
                • Jan 2010
                • 16083

                #8
                Re: IR 3035 paper jam

                Originally posted by Tonersniffer
                Isnt the orginator of this post bineeshgeorge?

                are you a moderator Teckat?
                mind-reader real.jpg No > but I keep receiving these weird signals >
                " PTPS " (post traumatic posting syndrome) I guess
                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Working...