E009-0001 Error - Canon IR C3080
Copied 200 pages. Let machine sit a while and this error came up. Any ideas?
Copied 200 pages. Let machine sit a while and this error came up. Any ideas?
-
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!". -
Re: E009-0001 Error - Canon IR C3080
======================
E009-0001 =can be displayed when the output of the fixing pressure release home position sensor does not change although the fixing motor is rotated and reversed.
"E009-0001" , I would first inspect or replace the fixing pressure release home position sensor (PS13)
1. Re-fit the connector of the fixing pressure releasing home position sensor.
2. Re-fit J2006 and J225 connectors of the DC controller PCB.
3. If the symptom still occurs, replace the fixing pressure releasing home position sensor (PS13) with a new one.
4. If the symptom still occurs, replace the fixing motor (M3) with a new one.
5. If Step4 does not work on the symptom, re-fit all the connectors of the DC Driver PCB.
6. If Step5 does not work on the symptom, replace the DC Driver PCB with a new one.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment